2. Adımdaki Değişiklikler
Düzenleyen: TheFixaholic —
Düzenleme onaylandı tarafından TheFixaholic
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [title] Disconnecting Cables Part 1 | |
| [* black] Take the prying tool and carefully lift the metal clip on the flat connector above the right hinge. | |
| - | [* black] Now pull it |
| + | [* black] Now pull it out towards you |
| [* black] Finally disconnect all antenna cables found (2 or 4, depending on your specs) | |
| [* black] Disconnect them by either prying them off with the plastic tool or pulling upwards ''carefully'' from the cable itself. | |
| [* black] Now carefully pull them out of their latches with a tweezer (the prying tool is too sharp and could damage the cable coating). |