7. Adımdaki Değişiklikler
Düzenleyen: joelybean _ —
Düzenleme onaylandı tarafından joelybean _
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] Just like step one put the Trucks back onto the board. To do this push all the screws from the top of the board. On the bottom of the board place the truck on where each 4 screws are being pushed back through the holes. After this place the nuts on the screws and tighten them with the screw driver and socket. |
|---|---|
| + | [* black] Put the trucks of the board back on by first inserting the screws back in from the top. |
| + | [* black] Then fit the trucks to align with the screws and place nuts over area where the screws are overlapping. |
| + | [* black] Tighten the nuts using the socket and the screws with the screwdriver. |