Ana içeriğe geç

1. Adımdaki Değişiklikler

Düzenleyen: Austin Blakely

Düzenleme onaylandı tarafından Austin Blakely

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* red] Carefully open the ZIF tabs.
-[* red] Remove ribbon cable from the connectors and pull the cable from the battery.
-[* orange] Disconnect white plastic connector to cut off power supply to the motherboard.
-[* orange] Use the iFixit opening tool and disconnect in a downward motion. There should not be much resistance.
+[* red] Carefully flip up the locking tabs on the ZIF connectors and remove the ribbon cables from the connectors.
+[* orange] Disconnect the battery cable by sliding it downward from the connector with an iFixit opening tool.
[* icon_note] Using this tool reduces the chance of any sparking or electronic charge.