Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

1. Adımdaki Değişiklikler

Düzenleyen: Walter Galan

Düzenleme onaylandı tarafından Walter Galan

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Use the tip of a spudger to disconnect the "insert name here"push the edges of the I/O board connector straight out of its socket on the logic board.
[* icon_note] It is recommended "walk" the connector out of its socket. Simplyto carefully push the top and bottom cornerson both sides of the connector and carefully "walkto "walk" it out"out of its socket.
[* black] Use the tip of a spudger to disconnect the "insert name here"push the edges of the I/O board connector straight out of its socket on the logic board.
[* icon_note] It is recommended "walk" the connector out of its socket. Simplyto carefully push the top and bottom cornerson both sides of the connector and carefully "walkto "walk" it out"out of its socket.