Skip to main content

12. Adımdaki Değişiklikler

Düzenleyen: Andrew Optimus Goldheart

Düzenleme onaylandı by Andrew Optimus Goldheart

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* black] Remove the following screws securing the logic board and MagSafe DC-In board to the upper case:
[* black] Remove the following screws securing the logic board and MagSafe DC-In board to the upper case:
[* red] Eight 3.3 mm T5 Torx screws
[* orange] One Phillips #00 screw
[* yellow] Two 3.1 mm T5 Torx screws
[* black] Remove two more screws, from the MagSafe DC-In board in the upper right corner (second image).
[* green] Two 3.4 mm T5 Torx screws