Bu Adımdaki Değişiklikler
Düzenleyen: Raymond Kwasneski —
Düzenleme onaylandı tarafından Raymond Kwasneski
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* red] Remove the eight screws holding down the heat sink. |
|---|---|
| + | [* red] Remove the eight screws holding down the heat sink using a [BIT TYPE] bit. |
| [* black] Gently remove the heat sink by lifting up and sliding away from the side of the laptop. | |
| [* icon_note] Note: you will notice that there will be thermal paste on the "square" portion of the heat sink. This paste is needed for the computer to operate normally. If you believe that too much paste was lost or that it has not been replaced in years, clean both the heat sink and the CPU then apply new paste. |