Ana içeriğe geç

5. Adımdaki Değişiklikler

Düzenleyen: Jon Amireh

Düzenleme onaylandı tarafından Jon Amireh

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* red] Remove the 6 screws indicated in the picture. Place these screws in a labeled container as they are different than the bezel screws.
+[* red] Remove the 6 screws (M2-3mm) indicated in the picture. Place these screws in a labeled container as they are different than the bezel screws.
[* icon_note] If you are following this portion of the guide as a part of replacing the touchpad or the speaker, this step is NOT needed.