Ana içeriğe geç

7. Adımdaki Değişiklikler

Düzenleyen: Tarun Thiruma

Düzenleme onaylandı tarafından Tarun Thiruma

Önce
Sonra
Değiştirilmemiş

Adım Satırları

+[* black] Carefully disconnect the two antenna coax cables by prying them ***straight up*** from the logic board.
+ [* black] Slide your tweezers or spudger underneath each cable until it's near the socket, and then gently twist or pry up to disconnect it.
+[* icon_reminder] To reconnect each cable, align the connector directly over its socket, and then press down so it snaps into place.

Resim 1

Önceki resim yok

Eklendi

Resim 2

Önceki resim yok

Eklendi

Resim 3

Önceki resim yok

Eklendi