2. Adımdaki Değişiklikler
Düzenleyen: Tiny Machines 3D —
Düzenleme onaylandı tarafından Tiny Machines 3D
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [title] Calibration Screens | |
| [* icon_caution] These values are set for your machine and normally do not need modified. Edit at your own risk! However, if you feel you make a mistake, you can Initialize EEPROM from the Tools menu. | |
| [* black] Calibration | |
| [* icon_note] The white boxes will all be populated with your printer's settings. | |
| - | [* icon_note] Probe |
| - | [* icon_note] Steps/mm can be changed to fine tune your machine or add an aftermarket extruder. |
| - | [* black] Calibration-PID Tuning |
| - | |
| + | [* icon_note] ''Probe Offset'' can be changed if you change the probe to nozzle relationship. |
| + | [* icon_note] ''Steps/mm'' can be changed to fine tune your machine or add an aftermarket extruder. A popular bench test is a 20mm cube. |
| + | [* black] ''Calibration-PID Tuning>PID Automatic Tuning'' will initiate an automatic PID calibration. Enter a temperature 10 degrees over your printing temperature and press ***Start***. |
| + | [* black] ''Calibration-PID Tuning>PID Manual Tuning'' will display the current saved values and allow manual adjustment. |
| [* orange] After desired changes are made, press Store Settings |