14. Adımdaki Değişiklikler
Düzenleyen: Dominik Schnabelrauch —
Düzenleme onaylandı tarafından Dominik Schnabelrauch
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] Thread the battery cables through the gap in the headphone frame. |
|---|---|
| [* black] Remove the battery. | |
| [* icon_caution] Do not reinstall a damaged or deformed battery, as doing so is a potential safety hazard. Replace it with a new battery. | |
| [* icon_reminder] Before installing a new battery remove any remaining adhesive from the headphones, and clean the glued areas with isopropyl alcohol and a lint-free cloth. | |
| - | [* icon_reminder] Make sure the battery cables are long enough to solder them |
| + | [* icon_reminder] Make sure the battery cables are long enough to solder them onto the curcuit board before before installing new adhesive into the battery well. |
| [* icon_reminder] In order to position the battery correctly, apply the new adhesive into the headphones at the places where the old adhesive was located, not directly onto the battery. Press the new battery firmly into place for 5-10 seconds. |