2. Adımdaki Değişiklikler
Düzenleyen: Tarun Thiruma —
Düzenleme onaylandı tarafından Tarun Thiruma
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [title] Separate the bottom edge adhesive | |
| [* black] Apply a suction cup to the back of the phone, as close to the center of the bottom edge as possible. | |
| [* black] Pull on the suction cup with strong, steady force to create a gap between the back cover and the frame. | |
| [* black] Insert the point of an opening pick into the gap. | |
| [* icon_note] Due to tight tolerances, this may take multiple attempts of reheating with the iOpener and separating with the suction cup before you get it right. | |
| - | [* black] If you are having trouble creating a gap, |
| - | [* icon_caution] Do not apply excessive force with the pick, or you |
| + | [* black] If you are having trouble creating a gap, apply more heat to the edge and try again. |
| + | [* icon_caution] Do not apply excessive force with the pick, or you risk cracking the back cover glass. |