2. Adımdaki Değişiklikler
Düzenleyen: Tiny Machines 3D —
Düzenleme onaylandı tarafından Tiny Machines 3D
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [title] Bottom cover and PSU mounting screws | |
| - | [* yellow] Using a #1 Phillips screwdriver, remove the 11 screws on the bottom and 2 screws on each side for a total of 15. Next, remove the bottom cover. |
| - | [* blue] ''With the bottom cover removed, turn the printer ***++sideways ++***and remove the ***++power supple unit (PSU)++*** screws while holding the PSU in place ++*** ribbon cable side up.***++'' |
| + | [* yellow] Using a #1 Phillips screwdriver, remove the 11 screws on the bottom and 2 screws on each side for a total of 15 |
| + | [* black] Next, remove the bottom cover |
| + | [* blue] ''With the bottom cover removed, turn the printer ***++sideways ++***and remove the ***++power supple unit (PSU)++*** screws while holding the PSU in place ++*** ribbon cable side up***++'' |