Ana içeriğe geç

5. Adımdaki Değişiklikler

Düzenleyen: Arthur Shi

Düzenleme onaylandı tarafından Arthur Shi

Önce
Sonra
Değiştirilmemiş

Adım Satırları

+[title] Install the right side adhesive
[* black] Start with the right vertical side of the rear enclosure.
-[* icon_note] Before peeling off any backing, line it up against the frame of the iMac to get an idea of where it goes.
-[* black] Peel the short piece of backing off the back of the strip.
+[* icon_note] Before peeling off any backing, line the adhesive strip up against the frame of the iMac to get an idea of where it goes.
+[* black] Peel the clear, short piece of backing off the back of the strip.