Bu Adımdaki Değişiklikler
Düzenleyen: Arthur Shi —
Düzenleme onaylandı tarafından Arthur Shi
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* icon_note] The two remaining strips (14 and 15) do not have guide holes and are more difficult to place than the previous ones. Before sticking them down, we recommend first setting them in their respective places on the iMac to get comfortable with their placement. |
|---|---|
| - | [* black] Grasp the red film pull tab on the 14 adhesive strip and pull to remove the backing from the strip. |
| + | [* black] The lower strips do not have guide holes and are more difficult to place than the previous ones. Before sticking them down, set them in their respective places on the iMac to get comfortable with their placement. |
| + | [* icon_note] Unlike the previous strips, the lower strips are installed with the dark side facing up. |
| + | [* black] Grasp the red pull tab on the bottom right adhesive strip and pull to remove the white backing from the strip. |
| [* black] Align the strip on the bottom edge of the rear enclosure, directly to the right of the middle screw on that edge. | |
| [* black] Run your finger along the length of the adhesive strip to ensure it is straight and unwrinkled, pressing down as you go to adhere the strip to the iMac. | |
| + | [* black] If your iMac has a microphone hole, make sure that the adhesive is not covering the hole. (insert linked-in photo) |