iMac Intel 27" 2012-2019 Adhesive Strips Replacement 22 No'lu Adım Geçmişi

22. Adımdaki Değişiklikler

Düzenleyen: Arthur Shi — 14 Ağu 2020

Düzenleme onaylandı tarafından Arthur Shi

	[* icon_caution] Verify that your iMac is turned off and unplugged from power before you continue.
	[* black] After confirming that your iMac functions properly, disconnect the display cables and carefully lean the display forward.
-	[* black] Remove the film from the two ~~lower~~ strips by reaching in from above and pulling the ~~tab~~ straight up from the bottom edge of the display.
+	[* black] Remove the film from the two bottom strips by reaching in from above and pulling the blue tabs straight up from the bottom edge of the display.