Ana içeriğe geç

3. Adımdaki Değişiklikler

Düzenleyen: iRobot

Düzenleme onaylandı tarafından iRobot

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Gently lift the screen and pull it apart from the camera, taking care to unslot the screen brackets from the tabs on the bottom and left side of the camera.
[* blue] Do not pull too hard on the screen as there is still another delicate cable running from the screen to the rear board of the camera.
-[* black] Gently pull the wide ribbon (shown in an earlier step) cable from the front of the camera to the back using tweezers.
+[* black] Gently pull the wide ribbon (shown in an earlier step) cable from the front of the camera to the back using [product|IF145-020|tweezers].