Eşyalarını Tamir Et Topluluk Mağaza

1. Adımdaki Değişiklikler

Düzenleyen: Tommy Healy —

Düzenleme onaylandı tarafından Tommy Healy

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Place the internal electronics face up. (Look at the side with the flash)
-[* black] Right underneath the lens, the shutter is a small sheet of metal. Check to see if the shutter arm (what the red arrow is pointing to) is attached to the shutter with the small knob in the corner (circled in red).
-[* black] If the arm is not attached (as shown in the first picture), use tweezers to place the arm over the knob on the shutter. Reference picture 2 for the correct shutter arm position.
+[* black] The lens cover is a small sheet of metal that rests directly infront of the lens when the camera is turned off. Check to see if the spring action arm (what the red arrow is pointing to) is attached to the lens cover with the small knob in the corner (circled in red).
+[* black] If the arm is not attached (as shown in the first picture), use tweezers to place the arm over the knob on the lens cover. Reference picture 2 for the correct spring action arm position.