1. Adımdaki Değişiklikler
Düzenleyen: Megan Milam —
Düzenleme onaylandı tarafından Megan Milam
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Place the internal electronics face-up. (Look at the side with the flash) | |
| [* black] The lens cover is a small sheet of metal that rests directly infront of the lens when the camera is turned off. Check to see if the spring action arm (what the yellow arrow is pointing to) is attached to the lens cover with the small knob in the corner (circled in yellow). | |
| - | [* yellow] If the arm is not attached (as shown in the first picture), use tweezers to place the arm over the knob on the lens cover. Reference picture 2 for the correct spring action arm position. |