2. Adımdaki Değişiklikler
Düzenleyen: Keith Sechrist —
Düzenleme onaylandı tarafından Keith Sechrist
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] Once the screws have been removed, pull the circuit board away from the body of the camera. Note: wires will keep it from completely detaching. |
|---|---|
| - | [* yellow] Use the spudger to push the black plastic hooks through the circuit board to release the flash housing. |
| - | [* black] Pull the housing away from the circuit board. Wires are still attached and will have to be reattached once the part is replaced. |
| + | [* black] Once the screws have been removed, pull the circuit board away from the body of the camera. |
| + | [* icon_note] Wires will keep it from completely detaching. |
| + | [* black] Use the spudger to push the black plastic hooks through the circuit board to release the flash housing. |
| + | [* black] Pull the housing away from the circuit board. |