Eşyalarını Tamir Et Topluluk Mağaza

11. Adımdaki Değişiklikler

Düzenleyen: Andrew Optimus Goldheart —

Düzenleme onaylandı tarafından Andrew Optimus Goldheart

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* red] Remove the two outer 6 mm Torx screws securing each side of the display bracket to the upper case (4 screws total).
-[* black] ''When re-assembling, back out the inner 6 mm Torx screws about a quarter turn and gently align the display and upper case before inserting the outer 6 mm Torx screws. After the display and case are aligned, tighten the inner 6 mm Torx screens, then insert and tighten the outer 6 mm Torx screws.''
+[* icon_note] When re-assembling, back out the inner 6 mm Torx screws about a quarter turn and gently align the display and upper case before inserting the outer 6 mm Torx screws. After the display and case are aligned, tighten the inner 6 mm Torx screens, then insert and tighten the outer 6 mm Torx screws.