Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

11. Adımdaki Değişiklikler

Düzenleyen: Claire Rapp —

Düzenleme onaylandı tarafından Claire Rapp

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* red] Remove the two outer 6 mm Torx screws securing each side of the display bracket to the upper case (4 screws total).
[* icon_note] When re-assembling, back out the inner 6 mm Torx screws about a quarter turn and gently align the display and upper case before inserting the outer 6 mm Torx screws. After the display and case are aligned, tighten the inner 6 mm Torx screensscrews, then insert and tighten the outer 6 mm Torx screws.
[* icon_note] When re-assembling, back out the inner 6 mm Torx screws about a quarter turn and gently align the display and upper case before inserting the outer 6 mm Torx screws. After the display and case are aligned, tighten the inner 6 mm Torx screensscrews, then insert and tighten the outer 6 mm Torx screws.