Ana içeriğe geç

6. Adımdaki Değişiklikler

Düzenleyen: Adam O'Camb

Düzenleme onaylandı tarafından Adam O'Camb

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Remove the following screws securing the logic board:
[* red] Two 23.7 mm T8 screws
[* orange] One 20.1 mm T25 spacer screw
[* yellow] One 17.6 mm T8 screw
[* green] One 7.2 mm T8 screw
[* light_blue] Three 7.1 mm T8 screws
[* blue] One captive T8 screw
- [* icon_note] This screw is beneath a hole in the logic board. You may need a fixed screwdriver or the 60 mm extension from an iFixit driver kit to reach it.
+ [* icon_note] This screw is beneath a hole in the logic board. If you aren't using an iFixit driver, you may need an extension or a screwdriver with a longer shaft.