3. Adımdaki Değişiklikler
Düzenleyen: Arthur Shi —
Düzenleme onaylandı tarafından Arthur Shi
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| + | [title] Remove the old adhesive |
|---|---|
| + | [* icon_caution] Before you start placing strips, remove all of the old adhesive from around the perimeter of the rear enclosure. |
| + | [* black] If you are re-using your existing display, you must also remove the old adhesive from the back of the display. |
| + | [* black] Peel off the old strips of adhesive using tweezers or your fingers. Start at the bottom and peel ''upward'' towards the top of the device. |
| + | [* black] After all the old adhesive is removed, carefully clean the area under the adhesive with 90% (or greater) isopropyl alcohol and a lint-free cloth. Wipe in one direction, not back and forth. |
| + | [* icon_caution] ***Don't skip this step***, or your new adhesive strips may not bond properly, and the display may fall out of your iMac. |
Resim 1
Önceki resim yok
Eklendi
Resim 2
Önceki resim yok
Eklendi