iMac Intel 27" 2012-2015 Adhesive Strips Replacement 11 No'lu Adım Geçmişi

11. Adımdaki Değişiklikler

Düzenleyen: Arthur Shi — 30 Eyl 2020

Düzenleme onaylandı tarafından Arthur Shi

	[title] Install the top and left adhesives
	[* black] Work your way counter-clockwise around the perimeter of the iMac, adding three more adhesive strips in the same manner:
	[* red] Strip 12 on the top right
	[* orange] Strip 11 on the top left
	[* yellow] Strip 16 on the left vertical
	[* icon_note] These three strips have a hole at each end—always use the smaller hole for alignment for more precise placement.
-	[* green] On the iMac Intel 27" Retina 5K Display, strip 12's blue tabs will not line up with the top antenna in the same way as the ~~regular~~ model. This is perfectly acceptable and won't impact the performance of the strips or antenna.
+	[* green] On the iMac Intel 27" Retina 5K Display, the top-right strip's blue tabs will not line up with the top antenna in the same way as the non-5K model. This is perfectly acceptable and won't impact the performance of the strips or antenna.