iMac Intel 27" 2012-2015 Adhesive Strips Replacement 12 No'lu Adım Geçmişi

12. Adımdaki Değişiklikler

Düzenleyen: Arthur Shi — 30 Eyl 2020

Düzenleme onaylandı tarafından Arthur Shi

	[title] Install the bottom adhesives
-	[* icon_note] The two remaining strips (14 and 15) do not have guide holes and are more difficult to place ~~than the previous ones~~. Before sticking them down, we recommend first setting them in their respective places on the iMac to get comfortable with their placement.
+	[* icon_note] The two remaining strips (14 and 15) do not have guide holes and are more difficult to place. Before sticking them down, we recommend first setting them in their respective places on the iMac to get comfortable with their placement.
	[* black] Grasp the red pull tab on strip 14 and pull to remove the backing from the strip.
	[* black] Align the strip on the bottom edge of the rear enclosure, directly to the right of the middle screw on that edge.
	[* black] Run your finger along the length of the adhesive strip to ensure it is straight and unwrinkled, pressing down as you go to adhere the strip to the iMac.