Ana içeriğe geç

8. Adımdaki Değişiklikler

Düzenleyen: Austin Blakely

Düzenleme onaylandı tarafından Austin Blakely

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* blue] ***Fastening the replacement deck boards ***
-[* black] 1. Pre-drill the holes by using 1/8'' drill bit.
-[* black] 2.Drive screws(8*3") into these pre-drilled holes.
-[* black] 3. Use a wet scrubbing sponge to clean up the lines.
-[* icon_note] You may choose nails but screws are always preferable to nails when fastening deck boards
+[* black] Pre-drill the holes at the marked spots using a 1/8th inch drill bit.
+[* black] Drive screws into the pre-drilled holes.
+[* black] Use a wet scrubbing sponge to clean up the lines.
+[* icon_note] You may choose nails but screws are always preferable to nails when fastening deck boards.