11. Adımdaki Değişiklikler
Düzenleyen: Victor A Galaviz —
Düzenleme onaylandı tarafından Victor A Galaviz
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] Place the coils back into the sparkplug hole and hand tighten them down. The last coil pack will also be placed in the sparkplug hole but make sure to plug it back in. Then tighten the 5 10mm screws that hold down the valve cover. If you are using a torque wrench, they will be torqued to 8.7 lb ft. |
|---|---|
| + | [* black] Place the coils back into the sparkplug hole and hand tighten the 10mm bolts to hold them down. The last coil pack will also be placed in the sparkplug hole but make sure to plug it back in. Then tighten the 5 10mm screws that hold down the valve cover. If you are using a torque wrench, they will be torqued to 8.7 lb ft. |