2. Adımdaki Değişiklikler
Düzenleyen: Tiny Machines 3D —
Düzenleme onaylandı tarafından Tiny Machines 3D
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [title] Disassembly 1a. | |
| - | [* black] Using a M2.5 hex and 8mm open end wrench, loosen the bottom inner wheel eccentric locknut. Back it off a few turns. |
| + | [* icon_note] The X Axis assembly is attached to the X/Z trolleys with 4 M4 cap screws and T nuts. |
| + | [* blue] New line. |
| + | [* black] Remove the assembly by loosening the cap screws from the back of the machine. The T nuts just need to align parallel to the slot. |
| + | [* black] Hold on to the X Axis assembly with one hand as it will fall onto the bed. |