10. Adımdaki Değişiklikler
Düzenleyen: Arthur Shi —
Düzenleme onaylandı tarafından Arthur Shi
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| + | [* icon_note] If your motherboard has a socket for a hard drive temperature sensor, follow this step to plug the sensor wires in. |
|---|---|
| + | [* black] Find a connector on the motherboard labeled ***HD TMP*** or ***HDD TEMP***. |
| + | [* icon_note] If you have trouble locating it, trace the two-wire temperature cable you disconnected from the old hard drive. |
| + | [* black] If the previous temperature cable is still connected to the board here, disconnect and remove it. You will no longer need it. |
| + | [* black] Connect the temperature sensor's two-wire red-black cable to the motherboard plug labeled ***HD TMP*** or ***HDD TEMP***. |
| + | [* icon_note] The connector is keyed to fit in one way only. If it seems like the connector is not fitting the socket, flip the connector and try again. |
| + | [* black] Route the excess wire so it does not interfere with any other components. |
Resim 1
Önceki resim yok
Eklendi
Resim 2
Önceki resim yok
Eklendi
Resim 3
Önceki resim yok
Eklendi