Eşyalarını Tamir Et Topluluk Mağaza

3. Adımdaki Değişiklikler

Düzenleyen: Miroslav Djuric —

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* red] Use a screwdriver to remove the 5 screws on the stylus holder.
-[* orange] Removing 2/5 screws on the stylus also removes the "R" trigger.
- [* icon_caution] Caution: The "R" trigger has a spring behind its center and a small metal axle in its joint.
+[* orange] Also disconnect and remove the "R" trigger button, which is held in place by two of the five stylus holder screws.
+[* icon_caution] The "R" trigger has a spring behind its center and a small metal axle in its joint.