2. Adımdaki Değişiklikler
Düzenleyen: Arthur Shi —
Düzenleme onaylandı tarafından Arthur Shi
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] Turn the screen assembly over and insert an opening pick in between the LCD panel and the digitizer at the top-left corner. |
|---|---|
| - | [* icon_note] You can slightly bend the digitizer to create a wider gap, but take care not to bend it to far to cause damage to the digitizer. |
| - | [* black] Begin sliding the opening pick along the top edge of the screen assembly to slice the adhesive. |
| + | [* black] Turn the screen assembly over. |
| + | [* black] Insert an opening pick in between the LCD panel and the digitizer at the top-left corner. |
| + | [* icon_note] You can slightly bend the digitizer to create a wider gap, but take care not to bend it too far to cause damage to the digitizer. |
| + | [* black] Slide the opening pick along the top edge of the screen assembly to slice the adhesive. |