Ana içeriğe geç

6. Adımdaki Değişiklikler

Düzenleyen: brady

Düzenleme onaylandı tarafından brady

Önce
Sonra
Değiştirilmemiş

Adım Satırları

+[title] Putting the panel on, putting on the bottom case
+[* black] I put the panel back on for my computer. I'd imagine its optional but I did it just to be safe
+[* black] The panel is put on by putting the panel in the ridge between the outside tabs(the ones used to release it) and the inside tabs
+[* black] The panel is secured by pushing the outside tabs onto the panel (Picture 2)
+[* black] To put on the bottom case, line it up using the hinge and the cutout for the hinge, then make sure the screws line up
+[* black] Screw down the Phillips till they're tight be careful not to strip them.

Resim 1

Önceki resim yok

Eklendi

Resim 2

Önceki resim yok

Eklendi

Resim 3

Önceki resim yok

Eklendi