Eşyalarını Tamir Et Topluluk Mağaza

1. Adımdaki Değişiklikler

Düzenleyen: anna ferguson —

Düzenleme onaylandı tarafından anna ferguson

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] [http://Symptoms: The power won't reliably turn on/off and the 'pressure alert' LED often comes on in error.|Insert wisdom here.]
-[* black] Cause: the rubbery pale blue plastic around the power button has broken down and let water/toothpaste gunk into the casing.
+[* black] Remove the small white seal ring with small grips, pliers or (as shown) wire-cutters.
+[* black] Take it slowly to avoid damaging anything. Ideally get the edge of the cutters under the ring and push it off from behind rather than deforming it too much by squeezing from the sides. If it's tough try heating the area in a cup of hot water to soften the plastic.