Ana içeriğe geç

5. Adımdaki Değişiklikler

Düzenleyen: Jamie Bell

Düzenleme onaylandı tarafından Jamie Bell

Önce
Sonra
Değiştirilmemiş

Adım Satırları

+[* black] Lift the back end of the cover
+[* icon_caution] The cover is connected to the body by a cable. Don't open the cover all the way until this cable is unplugged!
+[* red] Unplug the 6-pin connector, then pry along the edges to release the plastic clips holding the top down
+[* black] Remove the cover
+[* icon_note] The clips at the nose of the drone require some extra pressure to release

Resim 1

Önceki resim yok

Eklendi

Resim 2

Önceki resim yok

Eklendi