10. Adımdaki Değişiklikler
Düzenleyen: Michael Wodzynski —
Düzenleme onaylandı tarafından Michael Wodzynski
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* icon_caution] Set the nozzle temperature to 285 degrees celsius for the heatblock to expand and grip it with a wrench |
|---|---|
| - | [* black] Gently reattach the heatsink thread with your pliers, leave some slack so that it is not flush with the heatblock |
| - | [* black] |
| - | [* black] |
| + | [* icon_caution] Set the nozzle temperature to 285 degrees celsius for the heatblock to expand and grip it with a wrench. |
| + | [* black] Gently reattach the heatsink thread with your pliers, leave some slack so that it is not flush with the heatblock. |
| + | [* black] Re-screw the cleaned nozzle but leave a gap between the nozzle and heatblock. |
| + | [* black] Screw the heatsink thread until it is flush with the heatblock. |
| [* black] Tighten the nozzle once again until you feel the that the nozzle's thread is touching the heatsink thread to ensure that filament does not build up in the heatblock threads. |