How to Unclog a Prusa i3 MK3 Nozzle 10 No'lu Adım Geçmişi

10. Adımdaki Değişiklikler

Düzenleyen: Kanlong Yang — 8 Mar 2021

Düzenleme onaylandı tarafından Kanlong Yang

-	[* icon_caution] ~~Set the~~ nozzle temperature to 285 degrees ~~celsius~~ for the heatblock to expand and grip it with a wrench.
-	[* black] Gently reattach the heatsink thread with your pliers, leave some slack so that it is not flush with the heatblock.
-	[* black] Re-screw the cleaned nozzle but leave a gap between the nozzle and heatblock.
+	[* icon_caution] Heat nozzle's temperature to *285 *degrees Celsius for the heatblock to expand and grip it with a wrench.
+	[* black] *Gently* reattach the heatsink thread with your pliers, leave some *slack* so that it is not flush with the heatblock.
+	[* black] Re-screw the cleaned nozzle but leave a *gap* between the nozzle and heatblock.
	[* black] Screw the heatsink thread until it is flush with the heatblock.
-	[* black] Tighten the nozzle once again until you feel the that the nozzle's thread is touching the heatsink thread to ensure that filament does not build up in the heatblock threads.
+	[* black] *Tighten* the nozzle once again until you feel the that the nozzle's thread is touching the heatsink thread to ensure that filament does not build up in the heatblock threads.