Ana içeriğe geç

4. Adımdaki Değişiklikler

Düzenleyen: Adriana Zwink

Düzenleme onaylandı tarafından Adriana Zwink

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[title] Slice the adhesive
-[* black] Slide an opening pick underneath the connector of the fingerprint sensor.
-[* black] Slide the opening pick further under the fingerprint sensor to cut through the adhesive underneath.
+[* black] Slide an opening pick underneath the connector of the fingerprint sensor to cut the adhesive underneath.
+[* black] Continue sliding the opening pick under the fingerprint sensor to cut through the adhesive underneath.
[* black] Cut through the remaining adhesive until you can lift the sensor with the opening pick.