3. Adımdaki Değişiklikler
Düzenleyen: Eduardo Ron —
Düzenleme onaylandı tarafından Eduardo Ron
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] After completing the removal of both wheels, your board should look like this. | |
| [* black] Begin the removal of the trucks by placing the skate tool over the bolt on the truck. | |
| - | [* black] Maintain a good grip on the tool and use the Phillips screwdriver to loosen the nuts as shown in the image. |
| + | [* black] Maintain a good grip on the tool and use the Phillips screwdriver to loosen the nuts as shown in the image. Repeat this for all 4 screws. |