3. Adımdaki Değişiklikler
Düzenleyen: Kristen Gismondi —
Düzenleme onaylandı tarafından Kristen Gismondi
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* icon_note] After completing the removal of both wheels, your board will look like this. | |
| - | [* black] Begin the removal of the trucks by placing the skate tool over the bolt on the truck. |
| - | [* black] Maintain a good grip on the tool and use the Phillips screwdriver to loosen the nuts as shown in the image. Repeat this for all 4 screws. |
| + | [* black] Place the skate tool over the bolt on the truck. |
| + | [* black] Maintain a good grip on the tool and use the Phillips screwdriver to loosen the nuts. |
| + | [* black] Repeat this step for all four screws. |