8. Adımdaki Değişiklikler
Adım Satırları
| [title] Remove control PCB (optional) | |
| [* black] You may need to remove the PCB to facilitate easier access to various components. | |
| [* black] Remove any screws holding the PCB to the chassis, plinth, or to any heat sinks that would restrict removal. | |
| - | [* black] On direct drive models, the motor's permanent magnets may be soldered onto the PCB. In this case you can either remove the PCB with the motor, spindle/bearing assembly, and its backing plate still attached; or unscrew the spindle/bearing assembly from the motor to remove the PCB with the motor field windings only. |