Ana içeriğe geç

Bu Adımdaki Değişiklikler

Düzenleyen: AJ Fite

Düzenleme onaylandı tarafından AJ Fite

Önce
Sonra
Değiştirilmemiş

Adım Satırları

+[* black] Remove the tape
+[* black] unplug the ribbon cable with twisers
+[* black] Then carefully lift/pry the motherboard out of the phone
+[* black] While removing the motherboard there is one cable under it that must be disconnected halfway through prying out the motherboard.
+[* black] 'NOTE' During this process the mute and the power button (from the top of the phone) may fall out. Do not panic. This is completely normal, simply set the buttons aside in a safe place.