5. Adımdaki Değişiklikler
Düzenleyen: James Parker —
Düzenleme onaylandı tarafından James Parker
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* yellow] Locate the transistor | |
| [* green] Note the location of the three pins on the transistor | |
| + | [* icon_caution] Soldering Irons can heat up to excess of 500 degrees Farenheit. Take caution when sautering. |
| [* light_blue] On the reverse side of the board, carefully de-sauter/de-solder these three pins and remove the broken transistor | |
| [* black] Paying attention to the direction in which the new transistor is facing, solder/sauter it in where the damaged one was removed. Take care to ensure that no sauter from each of the pins contacts eachother or any other component |