| - | [* black] In order to teardown the front pivoting assembly the snaprings must be removed using the snapring pliers. |
|---|
| - | [* black] Remove all six snaprings from the pivoting assembly. |
|---|
| - | [* black] It is recomended to wear eye protection during this step especially since snaprings have a tendency to spring all over the place. |
|---|
| + | [* black] Remove all six snap rings from the pivoting assembly. The process for using snap ring pliers is shown in Pictures 1-3. |
|---|
| + | [* black] ***Hint:*** ''Three snap rings are shown in Picture 1. The remaining three are on the other side in the same location.'' |
|---|
| + | [* black] ***Note:*** It is recomended to ***wear eye protection*** during this step since snap rings have a tendency to spring all over the place. |
|---|