Ana içeriğe geç

7. Adımdaki Değişiklikler

Düzenleyen: Sarah Westberg

Düzenleme onaylandı tarafından Sarah Westberg

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Ensure that the stripping has been properly reattached by closing the car door and observing the edges where stripping is present. If there are parts where the stripping is bulging out or is not present, realign and close the door again.
-[* black] With the stripping correctly in place, close the door and let the adhesive dry. This will ensure that the adhesive holds the stripping in the optimal position.
+[* black] To make sure that the weatherstripping has been properly attached, close the car door and observe the edges where the weatherstripping is present. If there are parts where the weatherstripping is bulging out or is not present, realign and close the door again.
+[* black] With the stripping correctly in place, close the door and let the adhesive dry.
+[* icon_note] This will ensure that the adhesive holds the stripping in the optimal position.