Ana içeriğe geç

4. Adımdaki Değişiklikler

Düzenleyen: Austin Blakely

Düzenleme onaylandı tarafından Austin Blakely

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Start to insert the plate with the screwdrivers connected to the wall.
-[* green] Make sure to to put the screw in the correct designated hole.
+[* green] Line up the screws in the plate with the screw holes in the wall.
+[* black] Tighten the screws slightly with your hands to ensure that both screws have found the proper holes.
+ [* icon_note] Once the screws have been tightened enough to stay in the holes, they should hold the outlet cover in place.