3. Adımdaki Değişiklikler
Düzenleyen: Arthur Shi —
Düzenleme onaylandı tarafından Arthur Shi
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [title] Desolder a joint | |
| [* icon_caution] Do not use the desoldering pump to desolder joints near small surface-mounted (SMT) components. The heat spillover and suction may dislodge the SMT components. | |
| [* black] Prime the desoldering pump by depressing the plunger. | |
| [* black] Heat the solder joint until the solder is liquified. To help with heat transfer, add some solder onto the soldering iron's tip. | |
| [* black] Position the pump's nozzle as close to the molten solder as possible. | |
| - | [* icon_note] The nozzle is made of heat-resistant plastic, so |
| + | [* icon_note] The nozzle is made of heat-resistant plastic, so don't worry about it melting from heat. |
| [* black] Press the side button to activate the pump. | |
| [* black] Repeat the process until the joint is clean. You can also use [product|IF317-053-6|solder wick|new_window=true] to help soak up any remnant solder. |