How to Use a Desoldering Pump 3 No'lu Adım Geçmişi

3. Adımdaki Değişiklikler

Düzenleyen: Arthur Shi — 18 Haz 2024

Düzenleme onaylandı tarafından Arthur Shi

	[title] Desolder a joint
	[* icon_caution] Do not use the desoldering pump to desolder joints near small surface-mounted (SMT) components. The heat spillover and suction may dislodge the SMT components.
	[* black] Prime the desoldering pump by depressing the plunger.
	[* black] Heat the solder joint until the solder is liquified. To help with heat transfer, add some solder onto the soldering iron's tip.
	[* black] Position the pump's nozzle as close to the molten solder as possible.
-	[* icon_note] The nozzle is made of heat-resistant plastic, so don't worry ~~about~~ it ~~melting from heat~~.
+	[* icon_note] The nozzle is made of heat-resistant plastic, so don't worry if you occasionally brush the tip with it.
	[* black] Press the side button to activate the pump.
	[* black] Repeat the process until the joint is clean. You can also use [product\|IF317-053-6\|solder wick\|new_window=true] to help soak up any remnant solder.