Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

3. Adımdaki Değişiklikler

Düzenleyen: Nadia Carroll

Düzenleme onaylandı tarafından Nadia Carroll

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Remove the main plastic body
[* black] Insert the plastic pry baropening tool into the slot on the top (indicated by the spudger) and pry the black part off phonephone.
[* blackicon_note] The bottom piece around the headphone and USB port may get caught, butcaught during this is normal jiggle and prystep. Simply carefully maneuver the case until it is released. The case is relatively flexible which helps here.
[* black] Insert the plastic pry baropening tool into the slot on the top (indicated by the spudger) and pry the black part off phonephone.
[* blackicon_note] The bottom piece around the headphone and USB port may get caught, butcaught during this is normal jiggle and prystep. Simply carefully maneuver the case until it is released. The case is relatively flexible which helps here.

Resim 1

Eski Sürüm

Yeni Sürüm