Eşyalarını Tamir Et Topluluk Mağaza

2. Adımdaki Değişiklikler

Düzenleyen: Kristen Gismondi —

Düzenleme onaylandı tarafından Kristen Gismondi

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] After each screw has been removed, carefully turn over the controller, and place it on a flat surface.
+[* black] Carefully turn over the controller and place it on a flat surface.
[* black] Slowly separate the top panel from the bottom panel.
-[* icon_reminder] The buttons are loose and may fall off the motherboard.
+[* icon_note] The buttons are loose and may fall off the motherboard.
[* black] Once separated, set aside the top panel.
-[* icon_note] During reassembly, make sure the front panel lines up with the buttons so they slide back into place.
+[* icon_reminder] During reassembly, make sure the front panel lines up with the buttons so they slide back into place.