Eşyalarını Tamir Et Topluluk Mağaza

2. Adımdaki Değişiklikler

Düzenleyen: Sarah Westberg —

Düzenleme onaylandı tarafından Sarah Westberg

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Insert the opening pick into the bottom of the Joy-Con, then move it towards the L and ZL buttons.
[* black] Lift the back shell off the Joy-Con and place it to the side.
-[* icon_caution] Potential for device damage. Do not fully remove the back shell. Doing so may cause the two ribbon cables connecting the charging rail to the motherboard to tear or break.
+[* icon_caution] Be careful when removing the back shell as it is connected to two ribbon cables by the charging rail and motherboard. Potential for device damage may occur if it is yanked apart.